Send Message
Home > products > Solar Road Studs >
Cast Aluminum Solar Warning Lights , Half Moon Reflective Studs On Road 600mah

Cast Aluminum Solar Warning Lights , Half Moon Reflective Studs On Road 600mah

solar powered road studs

solar led road studs

Place of Origin:

ShenZhen China

Brand Name:

changdaneng

Certification:

CE

Model Number:

CDN-BO01

Contact Us

Request A Quote
Product Details
Name:
Aluminum Solar LED Warning Lights
Material:
Aluminum
Solar Panel:
Mono-crystalline Silicon
Battery:
NI-MH 1.2V/600MAH
LED Visibility:
800 Meters
Capacitor Cavity:
600mAh
Payment & Shipping Terms
Minimum Order Quantity
10
Price
Price: USD 6 -7 per/ pcs
Packaging Details
2pcs/box, 60pcs/carton, 18.5kg/ctn Carton size:400*275*280mm
Delivery Time
5 working days
Payment Terms
T/T, Western Union
Supply Ability
1000 pcs/week
Product Description

Half moon 6 pcs led light cast aluminum solar warning lights on both sides of the road

SPECIFICATIONS

Dimensions 125*43*30mm

Weight 330g

Housing material Solar cell&I.C(integrated circuit)

Covered with U.V coated polycabonate(super-intensity)

Out case Aluminum alloy

Reflector Corner cube,Lexan 143

Refector color Yellow / Red / White / Blue / Green

LED 3 pcs per side

LED color Yellow / Red / White / Blue / Green

LED output 5000 mcd

LED output frequency Steady or flashing

LED visibility Up to 1000 meters

Activation Photo sensor

Storage device Super capacitor or NI-MH battery

Capacitor cavity 800mAh

Charge condition Sunny day -2hr,/Rainy day-8hr.

Life span Up to 5 years for NI-MH battery type

Lighting time 12-16 hour for steady model after charged fully

Waterproof IP68

Operating temperature -25 to +80C

Manufacturer’s warranty One year

 

FEATURES

FEATURES

Solar powered high intensity LEDs for superior performance in luminosity.

Super strong polycarbonate cover and aluminium shell for impact durability.

Maintenance free design. Automatic on/off light sensor activation.

Simple installation. Same procedure as with existing conventional markers.

Stud-free mounting for off-ground installation, eg. guard rails and barriers.

Operational life time is 3 to 5 times longer than conventional markers.

Double sided, single sided, 5 colours, steady or flashing modes.

Solar road stud is easy to install with virtually no maintenance.

APPLICATIONS

APPLICATIONS

Solar powered markers, bricks and other products can and should be used for:

Wet Roads,Foggy Conditions,Dark Rural Country Roads

Dangerous blind corners and sharp-curves, black spots and poorly lit areas...

Areas with whimsical and unpredictable weather conditions (coastal roads, foggy areas, wet and rainy regions, etc.)...

Joint intersections, on and off ramps, center lines and dividers, entrance warnings, carpool lanes, bridges, crosswalks...

Guidance lines, traffic islands, roundabouts, aprons, mountain roads...

Taxiways at airports, bike and pedestrian lanes, aboard ships and watercrafts...

Entertainment areas, parking lots, hotel entrances, gas stations and many more!

INSTRALLATION

The Solar road stud Series accumulates energy and charges itself throughout the day. As soon as dusk begins to fall, the L.E.D.s start working automatically. The solar road studs are developed to ensure a higher degree of safety for cars and drivers at blind spots and dangerous hard-to-see areas on the road.

For optimal performance, the recommended distance between each solar road studs are as follows:

Install Site Distance
Highways and Expressways 7 - 8 yards (5 - 6 meters)
Dangerous Entrances and Exits 4 - 5 yards (2 - 3 meters)
Access or Exit ways for Hospitals, Parking Lots, etc. 0.5 - 3 yards (0.5 - 2 meters)

Step 1 - Mark the installation points (figure A). See chart above for recommended distances. Areas in tunnels, inside buildings, under bridges, or places where there is no sunlight are not suitable for installation.

Step 2 - Drill the holes using the following specifications (figure B):

Diameter: 1.5" (30-32mm) Depth: 2.6" (60-65mm)

Step 3 - Clean the drilled holes and remove all dirt, sand, dust and moisture. Make sure the hole is dry before applying any adhesive (figure C). Also prior to using adhesive, place the SolarMarker in the drilled hole and check for a tight and even fit as well as clearance for the desired alignment.

Step 4 - Fill up the drilled hole with hot melted glue or regular epoxy (figure A) and place the SolarMarker into the adhesive paste. Align accordingly (figure E).

Step 5 - Check and make sure that the glue is completely dry and settled before exposing the solar road studs to traffic and road activity. Check the manufacturers' recommendations for proper drying time for the adhesive.

packing:

 

 

Send your inquiry directly to us

Privacy Policy China Good Quality Solar Road Studs Supplier. Copyright © 2018-2024 solar-studs.com . All Rights Reserved.